Plug Valve

Sanitary Plug Valve Sanitary 3 Ways Plug Valve / Sanitary 2 Ways Plug Valve
Sanitary Union Plug Valve / Sanitary Thread Plug Valve
The plug valve is widely used for viscosity liquid. As the plug valve is sealed by stainless steel. So it is clean type and high resistance of acid and alkali. While using the plug valve, please take care of the pressure. This valve can not be used for high pressure..

Butterfly Valve

Our Butterfly valve body could be offered with Weld end, Male end, female end, and Clamp end. Our butterfly valves can be installing with different type handles like 4 position pull handle, 12 position gripper handle and 10 more other types or installing with actuator for automatically control for your widely using.
The Butterfly valve body and disk are all made from full CNC machined, high grade level polish.

All of the products have been 100% press tested before shipping.
It is necessary you specify at the time when orders be placing if heat numbers and MTR's are required.
EPDM, Silicon and Viton seats are available for installing in our butterfly valves which are suitable for many applications in such as food, dairy, beverage, meat processing, chemical, and many other industries

Angular Valve

These valves are Manual Operated valves to regulate the flow anywhere from full open to fully close. These are designed specifically to accurately control the process. Improved sealing devices and highly accurate machining of the screw rod (stem) have provided tight shutoff as well as characterizable control. The design of the regulating element, which allows the stem holder to turn into the flow without any significant side loads. The linear action of the screw rod provides tight fit against the seal, which allows for clean separation of the process during closure. Tight shutoff is a characteristic of angular valves

Sampling Valve

Stainless steel sanitary sampling valve The valve is used to get sampling liquid to inspect the liquid inside the system. Features:
High precise casting body Pressure: 10bar Temperature: -60~ 180 degree Working mode: Manual type, pneumatic type Aseptic type, normal type Gaskets: PTFE, EPDM or Silicone Easy cleaning, easy maintenance Connection end: Weld, tri-clamped Standard: DIN, 3A Material: SS304, SS316L Inside surface finish: Ra0.4 Size: 1/4", 1/2", 1" Application: Food, beverage, dairy, pharmacy, chemical or any food processing Indus tries

Micro Valve

These valves are Manual Operated valves to regulate the flow anywhere from full open to fully closed. These are designed specifically to accurately control the process. Improved sealing devices and highly accurate machining of the stem have provided tight shutoff as well as characterizable control. The design of the regulating element, which allows the stem to turn into the flow without any significant side loads. The interior passageways of a regulating valve are designed to handle pressure differential.

Flow Control Valve

A flow control valve regulates the flow or pressure of a fluid. Flow Control valves normally respond to signals generated by independent devices such as flow meters or temperature gauges. Control valves are normally fitted with actuators and positioners

Pneumatic Butterfly Valve

Description Tri Clamp Sanitary Butterfly Valve With Pneumatic Actuator SUS316L Clamp Sterilization temperature reached 150℃ Valve material:SUS 316L Stainless Steel Connection: Clamp Work Pressure: 0-1.6MPa / 232psi Applicable Temperture: ≤80℃ Environment Temperature: -20℃ to 60℃ Applicable Medium: Water, Oil，Air Operation: Pneumatic Control Method: Single acting, Automatic return position. Operating range: 0-90° Leakage of Q: According to GB / T4213-92, for the Kv value of 10-4. Product certification: IS

Diaphragm Valve

Standardization design Aseptic diaphragm valves meet all kinds of international standards, to meet the needs of all kinds of configuration. Serial identification of each valve. Traceability of complete materials. High clean smooth surface, no dead corner flow channel design, self - net installation angle, easy to remove, maintenance and clean. Aseptic diaphragm valve mainly by the valve, diaphragm valve, drive, automatic control device. Customers may choose products according to design requirements.

Flow Diversion Valves

Application:
The series of valve are major let the medium reach the purpose of reversing or end stop,because the good sealablity and cleanability,they are extensively use to different sanitary industry areas.
Working Principle: The series of pneumatic cut-off reversing valve change the energy which process by compressed air to the mechanical energy,the mechanical energy can drive the valve rod axial moving ,thus move the different locating of Seal elements,which can control the switch for inlet of pipeline,finally realise the purpose of medium reversing or stop. The manual cut-off reversing valve series control by handle,also reach the purpose of medium reversing or stop at the end

TC BALL VALVE

Material AISI304 AISI316L Specification DN25-100 & 1"-4" Standard ISO, DIN, 3A,SMS etc Connection Welded, Clamped, Threaded, Flanged Working Principal manual operation or driving device operation Flow pattern straight Seat material PTFE, PCTFE, PEEK or upon your request Orifice size 2mm to 4.8mm Body construction 3-piece precision cast body Temperature -20degree celsius~135degree celsius

SS NON RETURN VALVE

• Body: o SS 316. SS304 and SS316L are required based on big volume.
o Fully precision machined by CNC machine.
o Angle design make the biggest flowing liquid as well as for disk easy open and close.
o Connection: clamp end, weld end, male end and female end are available from 1/2", 3/4" up to 4".
o Connection: weld end are available the tubing according to 3A, SMS, RJT(BS), DIN 11851.
o Middle clamp designed are available from 1/2", 3/4" up to 3".
o Middle flange designed are available from 1/2", 3/4" up to 4".
• Type of ends available:
o 3A: Clamp, Weld, Bevel male and female are available from 1/2" up 4"
o SMS: Weld end, male and female end are available from DN25 up to DN104.
o DIN: Weld end, male and female end are available from DN28, DN34, DN52, DN70, DN85 and DN101.6, DN104.
o I-Line: available from 1" up to 4".
• Spring:
o Stainless steel sanitary both closing design, both opening design is required.
• Seal ring of stem:
o EPDM. VITON OR SILICON is required.
• Body O-ring:
o NBR or EPDM. VITON is required.
• Working temperature:
o -10o ~ 120o (EPDM seal)

Inline Pipe Sight Glass

Detailed Product Description Material: SUS304, SUS316L Etc.
Type: Straight Tube Sight Glass
Technics: Mirror Polish, Sub-light
Head Code: Square Shape: Reducing
Connection Type: Welding Ends, Clamp, Union High Light: pipe sight glass , tri clamp sight glass
304 / 316L Stainless Steel Sanitary Hygienic Straight / Inline Tube / Pipe Sight Glass Male Thread Connection
Product Description
The food grade sanitary sight glass are designed for installation in hygienic process lines to allow visual observation of the product flow. As standard the cylindrical viewing tube is in clear food grade polycarbonate material making this range an excellent choice for use in plants with a “no glass” policy. The viewing tube is also available in borosilicate glass where preferred for reasons of high temperature or product compatibility. All stainless steel sight glass contact metallic parts are manufactured from forged AISI 304L or 316L stainless steel with a polished surface finish. The end connections of sanitary sight glass are butt weld for tube but other connection options can be offered on request.